Lenticular RIP software that can also do spiral correction and fan-out correction

PRESS RELEASE 「LentiDotManager Ver.2.2」corresponding to KODAK VMR mode (9600DPI in horizontal) is now released


February 1, 2018
RittaiGiken,Inc. Tokyo, Japan

LentiDotManager Ver.2.2 corresponding to
KODAK VMR mode (9600DPI in horizontal)
is now released

RittaiGiken,Inc. (Takuto Joko / CEO) in Tokyo, Japan has released LentiDotManager Ver.2.2 (raster image processor software) corresponding to KODAK VMR mode (9600DPI in horizontal) since February, 2018.

Herewith, exclusive workflow providing extra high-quality lenticular printing in max. 9600DPI is now born. This Ver.2.2 enables to make high-quality printing data than before by securing lateral resolution necessary for lenticular printing. The combination of CTP and this software for high-quality lenticular printing is the best method for innovative printing companies.



Main specification

Software outline Layout of image and plate check image, layout information management, halftone dot creation
Auto correction according to lens pitch
Various functions to improve quality and productivity of lenticular printing
OS Windows 7/8/10
Input 3D composite TIFF images, images for plate check and management
Output Plate size 1 bit TIFF images, 8 bit TIFF images for CIP3
Output resolution Normal mode:2400DPI, 2560DPI, 4000DPI, 5080DPI
VMR mode:2400x4800DPI, 2400x9600DPI, 2540x5080DPI, 2540x10160DPI
No. of halftone dot output lines (AM) Max. AM1000 lines in 10 line pitch (halftone dot only for lenticular printing)
Printing plate size Max. 1200mm x 900mm


Main Features

Database management for printer, plate, lens, pedestals, dot gain curve and others

LentiDotManager is the software which can simplify layout of lenticular printing. It enables to make layout more easily for similar work because the information that was used once is managed in database.

Auto correction according to lens pitch

Lens sheet of lenticular printing expands and contracts by temperature. It is necessary to make fine adjustments to layout of output images according to the expansion and contraction. LentiDotManager makes layout according to the expansion and contraction only by inputting the number of lens pitch. This 9600DPI output enables finer layout adjustments.

Fan-out adjustment

LentiDotManager corrects printer fan-out at a sub-pixel level. Streaking patterns caused by interference of correction pattern and lens does not occur.

Ultra-thin line halftone dot creation

Lenticular printing enables to make depth by setting up many images in a horizontal direction. This correspondence to the horizontal direction 9600DPI output provides high quality halftone output.

Banding removal

In lenticular printing, the lens which formed a line into a stripe form is laid over stripe-shaped image. Banding may occur because width of the stripe of the lens is little different from stripe of the print. As for LentiDotManager, banding works not to occur. LentiDotManager manages color banding as well.

Layout of large capacity image

In image for lenticular printing, pictures to look from many directions are set up. Image size becomes large because many images are set into fine lens. LentiDotManager enables to layout large capacity image as much as necessary.

Spiral correction cancellation function

Many of CTP output machine are spiral exposure type. In this type, banding occurs by spiral correction when lenticular printing is done. LentiDotManager outputs plate to cancel the correction.

Simultaneous generation of halftones with various numbers of lines and degrees

Moire is generated when lenticular lens interferes with halftone. Fine adjustment of halftone angle in ink can make moire less noticeable. LentiDotManager enables to set specific numbers of lines and degrees for every each image.


Inquires / orders

International sales agent

Hill Forest Trading Japan Inc.
Kimga Bldg. 5F, 1-1-25, Ohogi-cho, Naka-ku
Yokohama, Kanagawa 231-0027 JAPAN
TEL +81-50-5806-7281 FAX +81-45-345-0386